Baseball
Catcher (C)
Catcher is a position for a baseball or softball player. When a batter takes his/her turn to hit, the catcher crouches behind home plate, in front of the (home) umpire, and receives the ball from the pitcher. In addition to these primary duties, the catcher is also called upon to master many other skills in order to field the position well. The role of the catcher is similar to that of the wicket-keeper in cricket. In the numbering system used to record baseball plays, the catcher is assigned the number 2.
Positioned behind home plate, the catcher can see the whole field, and is therefore in the best position to direct and lead the other players in a defensive play. The catcher typically calls for pitches using hand signals. The calls are based on the pitcher's mechanics and strengths, as well as the batter's tendencies and weaknesses. Foul tips, bouncing balls in the dirt, and contact with runners during plays at the plate are all events to be handled by the catcher, necessitating the use of protective equipment. This includes a mask, chest and throat protectors, shin guards, and a heavily padded catcher's mitt.
Because the position requires a comprehensive understanding of the game's strategies, the pool of former catchers yields a disproportionate number of managers in both Major League Baseball and Minor League Baseball. The physical and mental demands of being involved on every defensive play can wear catchers down over a long season, and can have a negative effect on their offensive output.
Because of the strategic defensive importance of catching, if a catcher has exceptional defensive skills, teams are often willing to overlook their relative offensive weaknesses. A knowledgeable catcher's ability to work with the pitcher, via pitch selection and location, can diminish the effectiveness of the opposing team's offense. Many great defensive catchers toiled in relative anonymity, because they did not produce large offensive numbers. Catchers are often able to play first base and less commonly third base.
History and Progression of the Position
In the middle of the nineteenth century, the game of baseball began to evolve from a sport played by amateurs for recreation into a more serious game played by professionals. One of the most dramatic changes was the transition of the pitcher's delivery from an underhand motion to an overhanded throw. Before the American Civil War, the pitcher's role was to initiate the action by offering an underhanded throw to the batter, in much the same way that a basketball referee offers up a jump ball to begin play. Since this type of pitching often caused the batter to hit lazy, foul pop-ups, catchers played their position approximately twenty to twenty-five feet behind the batter, and wore no protective equipment.
As the game progressed towards professionals and became more serious, pitchers began to attempt to prevent the batter from hitting the ball by throwing faster pitches. With the introduction of the strike in 1858, catchers began inching closer to home plate due to the rules requirement that a strikeout could only be completed by a catch. The rules governing the delivery of pitches proved to be hard to enforce, and pitchers continued to stretch the boundaries of the rules until by the 1870s, the release point of pitches had reached the pitcher's waist level.
These developments meant that catchers began to take on a crucial defensive role, as a pitcher's deceptive deliveries could only be effective if the catcher was capable of fielding them. The progression of the catcher positioning himself closer to the plate would lead to changes in pitching deliveries that would revolutionize the sport. In the 1870s, pitcher Candy Cummings was able to introduce the curveball because his catcher, Nat Hicks, fielded his position in close proximity to home plate and was able to catch the deceptive pitch. Other specialized pitches such as the spitball and the knuckleball followed, which further emphasized the defensive importance of the catcher's position.
The rising velocity of pitches in conjunction with catchers moving closer to home plate significantly increased the risk of injuries for catchers, especially face and hand injuries. By the late 1870s, catchers began to use padded, fingerless gloves to protect their hands, and in 1877 the first protective catcher's mask was used. The first catchers to use protective masks sometimes had their courage called into question, but the effectiveness of the masks in preventing injuries meant that they became widely accepted. In the 1880s, the first padded chest protectors came into use, and in 1888 specialized catcher's mitts used on the non-throwing hand began to be used.
At about the same time that catchers began fielding their position closer to home plate, baseball teams began using a less rubbery ball which led to a decline in the number of runs scored. In the 1860s it was common for teams to score fifty or sixty runs in a game. The combination of the new, harder ball and the continuation of the rise in pitcher's release points helped usher in what became known as the Dead-ball era. The decrease in run production placed greater significance on stolen bases and bunts, which in turn emphasized the crucial defensive role played by catchers. Together, the rules changes and the new protective equipment transformed the catcher's defensive role to the way that it is presently played.
Catching Pitches
The catcher is usually the first to notice the tendencies, quirks, and peculiarities of each home-plate umpire. Some umpires favor high strikes, pitched balls that are technically above the strike zone but appear, to the umpire, to be good. Conversely, some umpires will call low pitches strikes even when they are slightly below the knees. Other umpires have an inside bias or an outside bias; some umpires have more than one bias; some are uniformly lenient; some have very restricted notions of the strike zone, and the pitcher will constantly feel that his pitches are unfairly judged. The catcher can exploit an umpire's tendencies by taking him into account in how he chooses to receive the ball.
The catcher can help his pitcher get more strike calls from the umpire by using a technique called "framing". This practice is a matter of a catcher keeping his mitt inside the strike zone, or making the pitch appear as close to the strike zone, when receiving the pitch, thereby giving the plate umpire the impression that the pitch is in the strike zone, even if it is not. When framing, a catcher will also hold his mitt still for a second or two so that the umpire has an opportunity to thoroughly consider his call (and, hopefully, let his innate biases influence his decision in a direction favorable to the catcher's team).
The catcher, when receiving a borderline pitch, usually has several options in how he makes the catch. He can catch the pitch in the webbing of his mitt or in the heel; he can catch the pitch on his forehand or backhand, as necessary; he can catch a low pitch with the mitt pointed upward or downward. These choices help the catcher to create a favorable presentation (or frame) for the umpire.
A variation on "framing" is called "pulling pitches". The general approach is to catch the half of the ball that is outside the strike zone and show the umpire only the half of the ball, lodged in the mitt, that is closer to the zone. The illusion is often enhanced with a slight 'tug' of the mitt (of an inch or two) toward the strike zone.
By rule the catcher must station directly back of the plate (generally in the catcher's box) the moment a pitch is thrown but may leave at any time to catch a pitch or make a play. The moment an intentional ball leaves a pitcher's hand, the catcher must have both feet in the catcher's box. The catcher is the only defensive player who is allowed to be in foul territory when a pitch is thrown.
Calling the Game
Calling the game refers to the act of catchers to decide the type of pitch delivered to home plate. Catchers comprise a high percentage of baseball managers. As of April 2011, 15 of 30 Major League Baseball managers were former catchers. Because the catcher is considered a captain on the field, he is often in charge of planning defensive plays. The catcher will give signs to the pitcher for what pitch is to be thrown. The majority of the time it is done through a number system. Each number will represent a different pitch, and then the pitcher can either agree or disagree with a shake of his or her head. These signals get more complicated when a runner is on second base, because the runner's vantage point when he takes his lead gives him a direct view of the catcher's hand and a simple signal can be relayed by the runner to the batter. Signals are not always done by the number system. Some catchers were known for giving signals by touching certain parts of his chest protector.
The selection of which pitch to use can depend on a wide variety of situations such as; the type of hitter that is being faced, whether there are any base runners, how many outs have been made in the inning, or the current score, among others. The responsibility for selecting the type of pitch was traditionally made by the catcher. However, current form is to have the manager or a coach relay the pitch selection to the catcher, via secret hand signals to prevent the opposing team from having the advantage of knowing what the next pitch will be.
Throwing
A catcher nearly always throws with his right hand. Since most hitters are right-handed and stand to the left side of the plate when batting, a catcher who throws left-handed is forced to take some time to sidestep (or otherwise avoid) the right-handed hitter when he throws from behind the plate. In addition, a lefty's throw would tend to come in on the shortstop side of the bag, while a righty's throw would be on the second base side of the bag, which is where the runner is coming in.
Consequently, players who are left-handed rarely play catcher. Left-handed catchers have only caught eleven big-league games since 1902, and Jack Clements, who played for 17 years at the end of the nineteenth century, is the only man in the history of baseball to play more than three hundred games as a left-handed catcher. However, some observers have suggested that the real reason that there are no left-handed catchers is because left-handed players with strong throwing arms are almost always encouraged, at an early age, to become pitchers.
Blocking Balls in the Dirt
To block balls that a pitcher throws on a bounce toward home plate (pitches that are said to be "in the dirt"), the catcher will slide his body to the left or right, as necessary, to place himself directly in the path of the ball. Once in position, he drops to his knees, places his mitt between his legs to prevent the ball from passing through, and leans forward to deaden the rebound when, and if, the ball bounces off his thigh or torso.
Although inexperienced catchers may try to catch the errant pitch with his mitt, coaches often prioritize the catcher's ability to "keep the ball in front of him" than to make a catch with his mitt. Ideally, the catcher will be able to knock the ball to the ground where it will stop within arm's reach. To perform this properly, without the ball being deflected in an undesirable direction, the catcher must angle his body so that his chest is always leaning forward, toward home plate. This maneuver is often difficult, and its difficulty depends largely on how fast the ball is traveling, the angle at which the ball is thrown into the ground, where it first hits the ground, the firmness of the ground it hits, and the manner in which it is spinning.
Defensive Plays
Unlike the other fielders, the catcher and pitcher must start every play in a designated area. The catcher must be behind home plate in the catcher's box, while the pitcher must be on the pitcher's mound, with one foot in contact with the pitcher's rubber. Once the ball is in play, however, the catcher and pitcher, like the other fielders, can respond to any part of the field necessary to make or assist in a defensive play. The defensive plays expected of catchers, aside from managing the pitcher by calling for pitches and catching them, include:
- Preventing wild pitches and avoiding passed balls. Although the pitcher has a responsibility to throw with reasonable accuracy, catchers must be mobile enough to catch (or block) errant pitches. By doing so, a catcher prevents baserunners from advancing while the loose ball is retrieved. An errant pitch that eludes the catcher and allows a baserunner to take one or more additional bases is called a wild pitch. A pitched ball which would require only ordinary effort to be caught or blocked by the catcher — but is nonetheless misplayed, allowing a base runner to advance — is called a "passed ball".
- Fielding high pop flies, often hit at unusual angles.
- Fielding weakly hit fair ground balls (including bunts) in front of home plate in order to throw to a base to complete a groundout or a fielder's choice play. The catcher must avoid hitting the batter-runner with the thrown ball, implying that he must move to a position in which he has a clear throw to the infielder at first base.
- Guarding home plate on plays in which a baserunner attempts to score a run. The catcher is often obliged to catch a ball thrown from a fielder and to tag out a runner arriving from third base. Naturally, the runner's objective, in this situation, is to elude the catcher's tag and touch the plate. Prior to 2014, the catcher's best strategy was to block the runner's path so as to prevent the runner from reaching the plate at all. Collisions between runners and catchers were common. Since the start of the 2014 season, a catcher may only obstruct a runner's path to home plate when he, the catcher, is in possession of the ball. Without the ball in hand, the catcher must allow the runner to score uncontested. If the catcher drops the ball while tagging the runner, the runner is safe. Although contact between a runner and a catcher was generally allowed in the major leagues until the beginning of the 2014 season, little league, high school, and college runners are encouraged or mandated to avoid significant contact.
- Preventing stolen bases by throwing to second base or third base to allow an infielder to tag a baserunner attempting to reach the base. A catcher who is very good at preventing stolen bases is said to have a low stolen-base percentage; a poor one has many bases stolen while he catches. A pitcher who is slow to deliver is often more at fault for stolen bases than the catcher is. Ideally, a catcher should be able to get the ball from his glove to that of the player covering second base in under two seconds. This is referred to as a catcher's "pop time", the time elapsing between the popping sound of the pitch striking the catcher's mitt and the similar pop when the ball arrives at the glove of the fielder covering second base.
- Rarely, a catcher can make a successful pick-off throw to a base to surprise an inattentive or incautious baserunner. Especially at the higher levels of baseball (where this play almost never results in an out), the catcher's snap throws are mainly for psychological effect. If the runner knows that the catcher often attempts snap throws, the runner is likely to take a smaller lead from his base before each pitch, which will allow the infielders an extra fraction of a second to throw the runner out at the next base if he attempts to advance (as, for example, when a ground ball is hit). Teams may sometimes call a deliberate play, the pitchout, wherein the pitcher intentionally throws the ball wide and high to the catcher, who comes out of his crouch to receive it and relays the ball quickly to a base to put a runner out.
- Rarely, a catcher will run to first base or third base to participate in rundown plays at those bases.
- In certain game situations, typically a ball batted to the shortstop or third baseman with no runners on base, the catcher may be expected to back-up first base in case the first baseman misses or mishandles a throw.
- In certain game situations, when a runner is on first and the batter bunts the ball or hits the ball softly in which causing the third baseman to rush in to get the ball and throw to first base, the catcher must cover third base so that the runner from first base does not advance to third base on the play and this then forces the third baseman to cover home plate.
- Any failure by the catcher can have dire consequences for his team. Passed balls are possible whenever one or more runners are on base. A failure to catch a ball thrown from the outfield on a play at home plate, or a failure to tag a runner, means that the defensive team fails to record an all-important out and, instead, it allows a run. On an attempt to prevent a stolen base, a catcher's bad throw might past the infielder and skip into the outfield, allowing an additional advance by the baserunner.
Equipment
Catchers in baseball use the following equipment to help prevent injury while behind the plate:
- Catcher's mask: To protect the face, much of the side of the head, and, often, part of the throat. In recent years, catchers have begun wearing masks similar to those worn by ice-hockey goaltenders. The hockey-style mask typically includes a section which protects the top of the head; older-style masks are usually worn over a flap-less helmet (worn backwards and often with a trimmed bill) to provide similar protection to the skull. Some helmets also are somewhat like the hockey style helmets. They have a helmet without a bill and a face mask. These are normally used only by very young players. The older style masks are now banned by the National Federation of State High School Associations.
- Mitt: Catchers use mitts with extra padding to lower the impact of the ball on their hand. The catcher is the only player on the field who is allowed to use this type of mitt. The first baseman also wears a mitt instead of a glove, but it is longer and not as heavily padded as a catcher's mitt.
- Shin guards: To protect the knees and legs from the impact of a ball that the catcher is unable to play cleanly. Less commonly called 'spike protectors', they are used to prevent injury caused by base-runners advancing home with 'spikes up', that is, with the intention of injuring or intimidating the catcher with their metal cleats. Most modern styles of shin guard also incorporate a flap that covers the top of the foot.
- Chest protector: A piece of equipment, padded with rubber, plastic foam, or gel, that protects the catcher's body from the impact of a pitch if he fails to catch it. Many modern chest protectors also have an extension to cover the shoulder of the non-throwing or "glove" hand.
- Cup: Worn by a catcher under his uniform to mitigate the risk of serious injury when a batted or thrown ball strikes the groin area.
Additionally, some catchers choose to use the following optional equipment:
- Knee savers: Special pads filled with air that attach to the straps of the shin guards, allowing cushion for the catcher when they are in the squatting position; they provide support for the knee ligaments which can, over time, stretch and tear.
- Inner protective glove: A glove, normally a batting glove, that is worn inside of the mitt to help absorb the shock of the pitched ball striking the hand.
- Throat protector: A hard-plastic plate which hangs from the bottom of the catcher's mask to protect the throat. Because a ball striking the throat may cave-in the windpipe, throat protectors are required in almost all youth-baseball games, even at the high-school level.
In addition to the protective equipment, a catcher usually also adopts practices that minimize his risk of injury. For instance, unlike fielders elsewhere on the field, a catcher tries, to the extent possible, to catch the ball with his gloved hand alone. An outfielder may catch a fly ball by covering the ball, once it strikes the pocket of his glove, with his bare hand in order to secure it. The catcher, however, tries to keep his bare hand, which is highly vulnerable to injury, out of harm's way by presenting the pitcher with a target (the large round glove) while hiding his unprotected throwing hand behind his back. By doing so, the bare hand cannot be struck by a foul tip. Many broken fingers, split fingernails, and grotesque dislocations are avoided by adherence to this simple expedient.
Given the physical punishment suffered by catchers, the pieces of equipment associated with the position are often referred to as "the tools of ignorance". This is an ironic expression; the catcher typically has the most thorough understanding of baseball tactics and strategies of any player on his team.
Catchers often experience knee tendonitis because of the constant squatting and bending of the knees while catching.
SPORTS
RESOURCES
This article uses material from the Wikipedia articles "Baseball" and "Catcher", which is released under the Creative Commons Attribution-Share-Alike License 3.0.
© Stories Preschool. All Rights Reserved.
